Glunz-Uhren V11141107 User Manual

Radio Controlled Alarm Clock Instructions
Safety instructions
We do not assume liability for resulting damages to property or personal injury if the product has been
abused in any way or damaged by improper use or failure to observe these operating
instructions. The guarantee will then expire!An exclamation mark in a triangle indicates
important information in the operating instructions. Carefully read the whole operating instructions
before operating the device.
• Unauthorised conversion and/or modification of the device are inadmissible because of safety and
approval reasons (CE).
• The appliance must not be subjected to heavy mechanical stress.
• Do not leave packaging materials around unattended; they can become a dangerous toy for children.
• The unit may only be used in dry inside areas.
• Servicing, adjustment or repair works must only be carried out by a specialist/ specialist workshop.
If any questions arise that are not answered in this operating instruction, contact our Technical Advisory
Service or other experts.
Features:
- DCF-77 version Radio-controlled clock
- Indoor temperature display ( ℃/ ℉ )
- Time in 12/24 hours format display
- Calendar display
- 2 daily alarms with snooze.
Starting the clock
Open the battery compartment & i nsert 1 x 1,5V, type “AAA” alkaline batteries. Pay attention to
correct polarity.
The LCD displays time as “0:00 ” and the clock starts to scan for Radio-controlled signal . (In optimal
condition, the correct time will be displayed within 3 to 5 minutes.)
The tower icon will keep flashing while the clock is searching for the signal.
When the wave icon remains constant on the display, it indicates successful reception of the Radio-
control time signal.
If the clock fails to receive the signal The tower symbol disappears from the LCD display.
In such case try moving the clock to another location say new the window away from any likely
interfering sources live television, computer, microwave oven etc & gently press the “Reset” button
with a pin (located at back of the clock).
DOWNUP
SET WAVE
ALARM
SNOOZE / LIGHT
Indoor t
emperature
Seconds
Hours / Minutes
Date
Day of week
Radio reception

Glunz-Uhren V11141107 Specifications

General

Model	V11141107
Category	Alarm Clock
Brand	Glunz-Uhren
Movement	Quartz
Display Type	Analog

Summary

Safety Instructions

Clock Features and Operation

Starting the Clock

Guides users through the initial setup and battery insertion process for the clock.

Automatic Radio-control Time Update

Details the clock's automatic daily scan for radio-controlled time signals.

Manual Time Setting

Explains how to manually set the year, date, time, and display format.

Time Zone Setting

Covers setting the time zone for regions outside of Germany.

Using WAVE Key

Describes how to manually initiate or stop radio-controlled time signal reception.

Temperature Display Settings

Instructions on how to switch temperature display between Celsius and Fahrenheit.

Alarm Time Setting

Procedure for setting the time for the two daily alarms.

Alarm On/Off

How to enable or disable the daily alarms on the clock.

Snooze Function

Explains how to activate the snooze feature when an alarm sounds.

Backlight

Instructions for activating the clock's backlight.

Maintenance and Disposal

Reset Function

Guidance on resetting the clock in case of abnormal operation.

Waste Electrical and Electronic Equipment Disposal

Information on proper disposal of the electronic device.

Used Batteries/Accumulators Disposal

Legal obligations and methods for disposing of used batteries.

Declaration of Conformity