GLW EC 65 - DESCRIPTION; Scope of Delivery; Use and Crimp Dies

DESCRIPTION EC 65
12/09 4
Scope of delivery
Figure 1 Scope of delivery
1
Basic device EC 65
4
Foot switch
2
Protective cover
5
Operating Manual
3
Line cord
Use
The electric crimper EC 65 is used for pressing crimp contacts.
By using different crimp dies crimp contacts of various kinds can be processed within a wide range
of cross sections. This wide range and short cycle times (< 1 s) make the EC 65 equally suitable
for use in workshops and in complex cable assembly systems.
Crimp dies
The available crimp dies are listed in the company supplementary sheets. Every crimp die is
assigned a protective cover with an exactly fitting insertion slit.