GLW EC 65 - EC CONFORMITY DECLARATION; Compliance and Standards

EC Conformity Declaration EC 65
03/16 22
Manufacturer: GLW GmbH
Address: Steinbeisstrasse 2
88353 Kisslegg
Germany
We hereby declare that the machine described below complies with the pertinent basic safety and
health requirements of the EC machine directive in design and construction and version marketed
by us. This declaration will lose its validity in the case of modifications to the machine which are not
approved by us.
Name of the
equipment: Crimping machine for crimp contacts
Machine type: EC 65
EC 65 US (115 V)
Pertinent EG- Machine directive 2006/42/EG
EG-Guidance: EG- Low-voltage directive 2006/95/EG
EG- Directive Electromagnetic Compatibility 2004/108/EG
Applied DIN EN ISO 12100-1 and -2:2004
harmonised DIN EN ISO 13857:2008
standards DIN EN 349:2008
DIN EN 60204-1:2006
DIN EN 50081-1:1993
DIN EN 50082-2:1994
Place, date Kisslegg, 16. March 2016
Legally binding signature:
Information about signatory: Bruno Weiland
Responsible person for Documents: Bruno Weiland