Need help?Do you have a question about the GMC 18VDT18V and is the answer not in the manual?
Ensuring a clean, well-lit work area and keeping children and bystanders away during operation.
Guidelines for safe use of plugs, avoiding contact with grounded surfaces, and cord care.
Staying alert, using safety equipment, avoiding accidental starting, and proper dress.
Proper usage, forcing the tool, handling damaged tools, and maintenance.
Safe handling, charging, and storage of battery packs to prevent injury and fire.
Ensuring power tools are serviced by qualified personnel with identical replacement parts.
Lists the items included in the product packaging.
Instructions on using the forward/reverse switch and trigger for speed control.
Procedure for replacing the drill chuck, including screw removal.
Steps for securing and releasing drill bits in the keyless chuck.
Adjusting the torque collar for screwdriver use and drill setting.
Techniques for clamping, supporting, and lubricating when drilling sheet metal.
Using high speed drill bits and referring to wood drilling advice.
Clamping scrap wood to prevent splintering when drilling.
Note that this drill is not designed for masonry; a hammer drill is required.
Tips for marking holes, not forcing the drill, keeping bits sharp, and reducing pressure.
Regularly check screws, store tools properly, and dispose of batteries safely.
To Next Page
General
