Passing Another Vehicle While Using Cruise Control
Use the accelerator pedal
to
increase your speed. When
you take your foot off the pedal, your vehicle will slow
down to the cruise control speed
you
set earlier.
Using Cruise Control on Hills
How
well your cruise control will work on hills depends
upon your speed, load and the steepness
of
the hills.
When going up steep hills, you may want
to
step on the
accelerator pedal
to
maintain your speed. When going
downhill, you may have
to
brake or shift to a lower gear
to
keep your speed down.
Of
course, applying
the
brake
takes you
out
of
cruise control. Many drivers find this
to
be too much trouble and don’t use cruise control
on
steep hills.
Ending Cruise Control
There
are
two
ways
to
turn
off
the cruise control:
Step lightly
on
the brake pedal.
0
Move the cruise switch
to
OFF.
Erasing Speed Memory
When you turn
off
the cruise control or the ignition,
your cruise control set speed memory is erased.
Lamps
Your lamp switch
is
on the driver’s side
of
the
instrument panel.
Rotate the knob clockwise
to
the parking lamp symbol
to turn on
the
following:
Parking Lamps
Taillamps
License Plate Lamps
Instrument Panel Lights
To Next Page
Loading...
