Changing
a
Flat Tire
If
a tire goes flat, avoid further tire and wheel damage
by driving slowly to a level place. Turn
on
your hazard
warning flashers.
Changing a tire can cause an injury. The vehicle
can slip
off
the jack and roll over you or other
people.
You
and they could be badly injured.
Find
a
level place to change your tire.
To
help
prevent the vehicle from moving:
1.
Set the parking brake firmly.
2.
Put the shift lever in PARK (P).
3. Thrn
off
the engine.
4.
Put the wheel blocks at the front and
rear of the tire farthest away from the
one being changed. That would be the
tire on the other side of the vehicle, at
the opposite end.
L1
W
The following steps will tell you how to use the jack and
change a tire.
5-23
To Next Page
Loading...
