5-6
6. Connect the red
positive (+) cable to the
positive (+) terminal of
the vehicle with the dead
battery. Use a remote
positive (+) terminal if
the vehicle has one.
7. Don’t let the other end
touch metal. Connect
it to the positive (+)
terminal of the good
battery. Use a remote
positive (+) terminal if
the vehicle has one.
8. Now connect the black
negative (
-) cable to
the good battery’s
negative (-) terminal.
Use a remote
negative (-) terminal
if the vehicle has one.
Your vehicle’s remote
negative (
-) terminal
is marked “GND.”
Don’t let the other end touch anything until the next
step. The other end of the negative (
-) cable doesn’t
go to the dead battery. It goes to a heavy, unpainted
metal part of the vehicle with the dead battery or to
a remote negative (
-) terminal if the vehicle has one.
Your vehicle’s remote negative (
-) terminal is
marked “GND.”
To Next Page