6-18
Engine Air Cleaner/Filter
“VORTEC” 2200 L4 Engine
“VORTEC” 4300 V6 Engine
See “Engine Compartment Overview” in the Index for
more information on location.
To remove either engine air cleaner/filter, do the
following:
1. Remove the fasteners that hold the cover on. and
remove the cover
2. Lift out the engine air cleaner/filter, if needed.
3. Insert a new air filter.
4. Reinstall the engine air cleaner/filter cover. Tighten
the fasteners to hold the cover in place.
To Next Page