If
this happens, follow these instructions to set the
variance for your particular location:
1.
Find your location on the zone map. Record your
zone number.
4.
Press US/MET until your zone number appears on
5.
Press MODE
to
enter your zone number. Your
the display.
variance is now set and the display
will
return to
the COMPITEMP mode.
2.
Press and hold both the US/MET and the MODE
buttons while in the COMPITEMP mode.
3. After five seconds, the compass will acknowledge
the variation mode by displaying the current zone
number. When it does, release both buttons.
TRIP: Once in the TRIP mode, pressing the MODE
button will take you through the following TRIP functions:
a
e
e
a
a
AVG
ECON (Average Economy): The average
fuel economy since the last reset is displayed.
lNST ECON (Instantaneous Economy):
Instantaneous fuel economy for the last second of
driving is displayed.
RANGE: The display indicates the estimated
distance that can be travelled with the remaining
fuel in the tank, based on the fuel economy for the
last few hours of driving.
FUEL USED: The fuel used since the last reset
is displayed.
AVG
SPEED (Average Speed): The average
speed since the last reset is displayed.
To reset the trip computer, press the MODE and
US/MET buttons simultaneously for at least two
seconds.
All
functions will be displayed briefly once the
system is reset. Reset can only be performed in the
AVG ECON,
FUEL
USED and AVG SPEED modes.
All three modes are reset simultaneously.
2-43
To Next Page
Loading...
