Climate Controls 8-7
2. Push the stop tab upwards until
the stop tab is under the
instrument panel assembly and
the glove box is released.
3. Unsnap the tabs beneath the
glove box that connects it to the
bottom of the instrument panel
assembly.
4. Remove the glove box.
5. Locate the service door for the
passenger compartment air filter.
6. Push the two tabs upwards and
release the latches holding the
service door. Lift the
service door.
7. Remove the old air filter.
8. Install the new air filter.
9. Close the service door and
latches.
10. Re‐install the glove box.
See your dealer if additional
assistance is needed.
To Next Page
Loading...
Need help?
General
