GMC 2017 Canyon - Head Restraint Adjustment; Heated and Ventilated Seats

GMC Canyon Owner Manual (GMNA-Localizing-U.S./Canada-10122677) -
2017 - crc - 8/22/16
In Brief 11
Reclining Seatbacks
To recline:
1. Lift the lever.
2. Move the seatback to the
desired position, and then
release the lever to lock the
seatback in place.
3. Push and pull on the seatback
to make sure it is locked.
To return the seatback to the upright
position:
1. Lift the lever fully without
applying pressure to the
seatback.
2. Push and pull on the seatback
to make sure it is locked.
See Reclining Seatbacks 0 48.
Heated and Ventilated
Seats
Uplevel Seat Buttons Shown, SLE/
SLT Buttons Similar
If equipped, the buttons are on the
center stack. To operate, the engine
must be running.
Press
z to heat the driver or
passenger seat cushion and
seatback.
If equipped, press
{ to ventilate the
driver or passenger seat.
See Heated and Ventilated Front
Seats 0 49.
Head Restraint
Adjustment
Do not drive until the head restraints
for all occupants are installed and
adjusted properly.
To achieve a comfortable seating
position, change the seatback
recline angle as little as necessary
while keeping the seat and the head
restraint height in the proper
position.
See Head Restraints 0 46 and Seat
Adjustment 0 47.