Storing Preset Destinations
1. If the radio is already on with a map disc
inserted, skip to Step 5.
2. Press the
O (power) knob to turn the
system on.
3. Insert the DVD map disc. See “Installing the
Map DVD” under Maps on page 19 for more
information.
4. A caution may appear. Select the OK screen
button to proceed.
5. Press the DEST hard key.
Enter a destination. See Destination on
page 29 for more information on how to enter
a destination.
6. Select the Map screen button after entering
the destination.
7. Select the Mark screen button from the map
screen to add the current final destination as
a preset destination.
The address book screen will appear.
8. Select the Name screen button. An
alpha-keyboard will display. Enter the name.
9. Press and hold one of the screen buttons at
the bottom of the screen until the name
appears in the screen button on the display.
The name will appear in that preset destination
screen button and is now available to select
from the Destination Entry screen. See “Using
Your Stored Preset Destinations” next in
this section to select it as a destination.
See “Adding or Changing Preset Destinations”
under Destination on page 29 for more
information on how to add preset destinations.
Using Your Stored Preset Destinations
These destinations are available for selection
while driving.
1. If the radio is already on with a map disc
inserted, skip to Step 5.
2. Press the
O (power) knob to turn the
system on.
3. Insert the DVD map disc. See “Installing the
Map DVD” under Maps on page 19 for more
information.
4. A caution may appear. Select the OK screen
button to proceed.
12
To Next Page
Loading...
