GMC Acadia 2007 - Page 43

To add a stopover:
1. Press the DEST hard key.
2. Select the Add or Add Stopover screen
button. This button will only appear if a
route has been calculated.
3. Using the desired method of entering a
destination, enter the stopover. See
“Destination” previously for more information.
4. Select the route preference (Fastest, Shortest,
or Other). The system will calculate and
highlight the route.
5. Select the Start Guidance screen button.
You are now ready to start your route.
6. To add the second and third stopovers, press
the DEST hard key, then select the Add
screen button, where you would like the next
stopover to fall on the route.
7. Select the route preference (Fastest, Shortest,
or Other). The system will calculate and
highlight the route.
8. Select the Start Guidance screen button.
You are now ready to start your route.
To delete a stopover from your current route:
1. Press the DEST hard key.
2. Select the Delete screen button for a stopover
to be deleted.
3. The system will display a pop-up confirmation
message. Select OK to delete the stopover;
select Cancel to cancel this operation.
4. Select the route preference (Fastest, Shortest,
or Other). The system will calculate and
highlight the route.
5. Select the Start Guidance screen button.
You are now ready to start your route.
Suspend Guidance
Select this screen button, from the Route screen,
to put the current route on hold.
Resume Guidance
Select this screen button, from the Route screen,
to resume guidance on the current route.
Cancel Guidance
Select this screen button, from the Route screen,
to cancel the current route.
43