CD Commands
The following are CD, MP3, and DVD commands
that can be accessed by clearly stating the
commands exactly as they are written.
CD, DVD, Disc: Use this command to select a
CD, DVD, or disc that is currently loaded.
CD, DVD, Disc, [select] track (one, two,
three, etc.): This command instructs the system
to select a specific track number.
CD, DVD, Disc select next folder: Use this
command to select the next folder on the MP3 or
audio DVD.
CD, DVD, Disc select previous folder: Use this
command to select the previous folder on the
MP3 or audio DVD.
CD help, DVD help, Disc help: This command
instructs the system to assist with CD and
DVD commands.
Auxiliary Commands
The following auxiliary commands can be
accessed by clearly stating the commands exactly
as they are written. The commands are available
when the auxiliary source is available.
Aux, Auxiliary: Use this command to select the
auxiliary device, when a device is connected.
OnStar
®
Command
OnStar: This command instructs the system to
connect to OnStar
®
. You will enter the OnStar
®
voice recognition system. Refer to your OnStar
®
owner guide for more information.
Voice Help
Voice help: This command will provide a
description of help commands that can be used.
87
To Next Page
Loading...
