GMC ACADIA 2022 - Driver Information Center (DIC)

6
F Optional equipment
ELECTRONIC PRECISION SHIFT TRANSMISSION
The Electronic Precision Shift transmission control switches are located on the front console.
The selected gear position illuminates in red on the switch.
Park – Press the P button to shift to Park.
Reverse – Pull the R switch to shift to Reverse.
Neutral – Press the N button to shift to
Neutral.
Drive – Pull the D switch to shift to Drive.
ELECTRONIC RANGE SELECT MODE
Electronic Range Select Mode allows you to
choose the top gear limit. It can be used to
limit the vehicle’s speed when driving on a downhill grade or towing a trailer.
1. Press the L (Low) button.
2. Press the + (plus) or – (minus) button to increase or decrease the gear range available.
The current gear is displayed on the Driver Information Center.
If vehicle speed is too high or low for the requested gear, the shift will not occur.
AUTOMATED CAR WASH MODE
TherearedierentproceduresforplacingthetransmissioninNeutralwiththeengineonor
o,andifthedriverexitsthevehicle.RefertoyourOwner’sManualforeachprocedure.
See Driving and Operating in your Owner’s Manual.
DRIVER INFORMATION CENTER (DIC)
The DIC displays a variety of vehicle system information and warning messages.
DIC CONTROLS
Use the controls on the right side of the steer-
ing wheel to move through the DIC menus.
Press the or button to move
between the display zones. Press the
button to go back to the previous menu.
Press the or button to scroll through
the menus.
Press the button to open a menu,
or to select or reset an item.
SELECT INFO PAGES
1. Use the controls to view the Options menu.
2. Scroll to display Info Pages. Press to
view the pages.
3. Scroll through the list of items.
4. Press to select or deselect an item
to display in the Info menu.
Uplevel display
F
shown
See Instruments and Controls in your Owner’s Manual.