Need help?Do you have a question about the GMC AG230M and is the answer not in the manual?
Keep work area clean and well lit. Avoid operating in explosive atmospheres. Keep children and bystanders away.
Ensure plugs match outlets, avoid body contact with grounded surfaces, keep tools dry, and do not abuse the cord.
Stay alert, use safety equipment, avoid accidental starting, remove keys, maintain balance, dress properly, use dust extraction.
Use the correct tool for the application, do not force it, and use it safely.
Have your power tool serviced by a qualified repair person using only identical replacement parts.
Follow specific safety guidelines for angle grinders, including disc handling, speed limits, and proper operation.
Screw the multi-position auxiliary handle into the most suitable mounting point and adjust the rotating handle.
Switch off the grinder, open the guard lever, position lugs, press guard onto spindle cover, twist to position, and lock lever.
The LED alerts users to overloading, flashing yellow for warning, solid red for tool stop, requiring a brief pause.
Follow steps to plug in, hold tool firmly, push lock-off catch, pull switch to start, and release switch to stop.
Clamp workpiece, avoid overloading, take care with hot discs, hold securely, and maintain correct angles during operation.
Press spindle lock, unscrew outer flange, remove disc, clean flanges, check new disc, and fit correctly.
Press spindle lock, unscrew outer flange, remove disc, clean flanges, check new disc, and fit correctly with correct flange orientation.
To Next Page
General