GMC BJ110M User Manual

16 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

1

1350W

BISCUIT JOINER

BJ11OM

INSTRUCTION MANUAL

Black

Cyan

Magenta

Yellow

Code: BJ110M IM

Date:

060330 Edition: 04 Op: DCR

Questions and Answers:

J
Jessica JohnsonJul 30, 2025
What to do if my GMC BJ110M will not start?
- F
  Faith LewisJul 30, 2025
  If your GMC Biscuit Joiner won't start, first ensure that the power cord is properly connected to the power supply. Then, check the power supply for any faults, such as a tripped fuse or circuit breaker. If the cord is damaged or the switch is burned out, have it repaired or replaced by an authorized service center. A faulty motor should also be repaired or replaced by an authorized service center.
E
Elizabeth JordanAug 4, 2025
Why is my GMC BJ110M blade not reaching full speed?
- V
  Victor NelsonAug 4, 2025
  If the blade on your GMC Biscuit Joiner isn't reaching full speed, it could be due to an extension cord that is either too long or not heavy enough to carry the current; use a heavier gauge extension cord. Alternatively, the tool might be overheating. If overheating is the issue, turn off the tool and allow it to cool down to room temperature. Also, inspect and clean the ventilation slots.
B
burnsjessicaAug 10, 2025
Why is my GMC Biscuit Joiner vibrating or making abnormal noises?
- B
  burkemichaelAug 10, 2025
  If your GMC Biscuit Joiner is vibrating or making abnormal noises, start by checking that all levers, including the bevel and height adjustment levers, are secure. Also, ensure that the blade flange is securely tightened. If the moving parts are excessively worn, have the tool repaired or replaced by an authorized service center.
M
moorebrandiAug 17, 2025
What to do if biscuit does not fit into slot in GMC Biscuit Joiner?
- M
  Michael KingAug 17, 2025
  If the biscuit doesn't fit into the slot in your GMC Biscuit Joiner, ensure that you are using the correct size biscuit for the slot. For example, use a #10 biscuit for a #10 slot.
R
Randall BurtonAug 23, 2025
How to fix poor cutting with GMC Biscuit Joiner?
- S
  Sara AustinAug 23, 2025
  If you're experiencing poor cutting with your GMC Biscuit Joiner, the blade may be blunt. Replace it with a new biscuit joiner blade.

GMC BJ110M Specifications

General

Brand	GMC
Model	BJ110M
Category	Biscuit Joiner
Language	English

Summary

Product Overview and Specifications

Introduction and Environmental Protection

Overview of tool quality and advice on environmentally safe disposal.

Description of Symbols

Explains rating plate symbols for safety and compliance.

Technical Specifications

Lists key data: voltage, power, speed, dimensions, weight.

General Safety Rules

Work Area Safety

Guidelines for maintaining a safe and clear workspace during operation.

Electrical Safety Precautions

Precautions for power cords, plugs, and avoiding electrical hazards.

Personal Safety Measures

Advice on alertness, safety equipment, and proper attire for safe operation.

Safety Rules and Service Information

Power Tool Use and Care

Instructions on correct usage, maintenance, and handling of the power tool.

Service and Maintenance

Guidelines for tool servicing, parts replacement, and cord care.

Additional Biscuit Joiner Safety

Specific safety tips for operating biscuit joiners, including handling and extension cords.

Contents and Unpacking

Contents of Carton

Lists standard accessories included with the GMC BJ110M biscuit joiner.

Unpacking Instructions

Guidance on what to do if the tool or parts are faulty upon receipt.

Know Your Product

Overview and Adjustments

Adjusting the Cutting Depth

How to set the depth of cut to match biscuit sizes using the adjustment dial.

Tool Adjustments and Blade Change

Adjusting the Secondary Handle

Instructions for repositioning the secondary handle using an allen key.

Adjusting the Bevel Angle

How to tilt the main fence for cutting slots on bevelled edges.

Adjusting the Cutting Height

How to set the fence height for different biscuit slot depths.

Changing the Blade

Step-by-step guide to safely replace the biscuit joiner blade.

Operation: Turning On/Off

Operation: Making Joints

Operation Overview

Introduction to joint types achievable with a biscuit joiner.

Making a Cut

Steps for performing a basic cut or slotting operation on the workpiece.

Making an Edge to Edge Joint

Procedure for creating biscuit joints between two edge pieces of timber.

Making Specific Joints

Making a Mitre Joint

Steps for cutting biscuit slots for angled mitre joints.

Making a Corner Joint

Procedure for creating biscuit joints for corner connections.

Making a T-Joint

Steps for cutting biscuit slots for T-shaped joints.

Maintenance and Cleaning

Power Cord Maintenance

Guidelines for safe replacement of the power supply cord.

Cleaning Instructions

Advice on keeping air vents clear and cleaning the tool safely.

Troubleshooting Guide

Warranty and Support

Product Registration and Helpline

Information on registering the warranty and contacting the customer helpline.