Audio Steering Wheel Controls
You can control certain radio functions using the buttons
on your steering wheel.
g (OnStar/Voice Recognition): If your vehicle has
OnStar
®
, you can press this button to interact with
the OnStar
®
system. See the OnStar
®
manual provided
with your vehicle for more information.
IF your vehicle does not have OnStar
®
, pressing this
button will mute the audio system.
PROG (Program): Press this button to play a station
you have programmed on the radio preset pushbuttons
on the selected band. If a cassette tape is playing, press
this button to play the other side of the tape. If a CD is
playing, press this button to go to the next available CD.
Q SOURCE R: Press this button to select AM, FM1,
FM2, or XM1 or XM2, (USA only, if equipped), or a
cassette tape or CD. The cassette or CD must be loaded
to play. Available loaded sources are shown on the
display as a tape or a CD symbol.
Q SEEK R: Press the up or the down arrow to seek
to the next or to the previous radio station and stay
there.
Q VOLR: Press the up or the down arrow to increase
or to decrease volume.
DVD Distortion
You may experience audio distortion in the
IR headphones when operating cellular phones,
scanners, CB radios, Global Positioning Systems
(GPS)*, two-way radios, mobile fax, or walkie talkies.
It may be necessary to turn off the DVD player
when operating one of these devices in or near the
vehicle.
* Excludes the OnStar
®
System.
3-126
To Next Page
Loading...
Need help?
General
