19
Open/Close the Power Liftgate
Press the Power Liftgate button twice on the
Remote Keyless Entry (RKE) transmitter.
Press the Liftgate knob on the driver’s door.
Press the touchpad on the liftgate handle to
open the liftgate.
Press the button next to the pull handle to
close the liftgate.
Programming the Liftgate Height
1.
Turn the Liftgate knob to the 3/4 mode
position.
2.
Open the liftgate. Adjust it manually to the
desired height.
3.
To save the setting, press and hold the
button next to the pull handle until a beep
sounds.
4. In the 3/4 mode position, the power liftgate
will open to the programmed height.
Hands-Free Operation
F
To open or close the liftgate hands-free, kick your foot straight under the rear bumper, just left
of the license plate. The RKE transmitter must be within 3 feet of the liftgate.
POWER PROGRAMMABLE LIFTGATE
F
TIRE PRESSURE MONITOR
HILL DESCENT CONTROL
Hill Descent Control sets and maintains vehicle speed from 2–14 mph while descending a very
steep incline in a forward or reverse gear.
Press the Hill Descent Control button on the center console. Vehicle speed must be below
31 mph to turn on the system.
Increase or decrease speed by applying the accelerator or brake pedal or use the Cruise
Control +/– buttons on the steering wheel. The adjusted speed becomes the new set speed.
The symbol flashes on the instrument cluster when the system is actively applying the
brakes to maintain vehicle speed.
See Driving and Operating in your Owner’s Manual.
F
Optional equipment
The
Low Tire Pressure warning light on the instrument cluster illuminates when one or more of
the vehicle’s tires is significantly underinflated. Fill the tires to the proper tire pressures listed on
the Tire and Loading Information label located below the driver’s door latch. Current tire pressures
can be viewed in the Driver Information Center.
See Vehicle Care in your Owner’s Manual.
See Keys, Doors and Windows in your Owner’s Manual.
To Next Page
Loading...
