Contents
Warranty 2
Introduction 3
Environmental protection 3
Description of symbols 3
Specifications 3
General safety instructions 4
Additional safety rules for planer thicknessers 5
Unpacking 6
Assembly 6
Know your product 7
Lifting 8
Mounting 8
Switching on and off 8
Overload switch 8
Adjusting the depth of cut 9
Calibrating the depth scale 9
Operation 9
Avoiding snipe 9
Removing the blades 10
Replacing the blades 10
Adjusting the cutter head to be parallel to
the worktable 11
General inspection 11
Cleaning 11
Repairs 11
Full 2 Years Warranty
Whilst every effort is made to ensure your complete
satisfaction with this tool, occasionally, due to the mass
manufacturing techniques, a tool may not live up to our
required level of performance and you may need the
assistance of our service department.
This product is warranted for a 2-year period from the
date of the original purchase. If found to be defective in
materials or workmanship, the tool or the offending
faulty component will be replaced free of charge with
another of the same item. A small freight charge
may apply.
The warranty replacement unit is only made available by
returning the tool to the place of purchase with a
confirmed register receipt. Proof of purchase is essential.
We reserve the right to reject any claim where the
purchase cannot be verified.
This warranty does not include damage or defects to the
tool caused by or resulting from abuse, accidents,
alterations or commercial or business use.
It also does not cover any bonus accessories unless the
tool is a GMC Platinum Professional model.
Please ensure that you store your receipt in a safe place.
Conditions apply to the above warranty.
If you need direction of what constitutes a free of
charge warranty claim, please review the guide given on
the rear of the Receipt Holder. An indication is given as
to the types of claim that are permissible, and those
that are not.
2
To Next Page
Loading...
