EasyManua.ls Logo

GMC Typhoon and Syclone User Manual

GMC Typhoon and Syclone
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Question and Answer IconNeed help?

Do you have a question about the GMC Typhoon and Syclone and is the answer not in the manual?

GMC Typhoon and Syclone Specifications

General IconGeneral
BrandGMC
ModelTyphoon and Syclone
CategoryAutomobile
LanguageEnglish

Summary

GMC Syclone and Typhoon Unique Characteristics

Owner Tampering Concerns

Discusses owner tampering with engine and drivetrain, jeopardizing trucks and warranties.

Engine Service Procedures for Syclone/Typhoon

Engine Service Procedure Steps

Steps for diagnosing engine issues, including warranty checks and contacting TAC.

Overboost and Tamper Items Checklist

Checklist for overboost and tampering issues, requiring specific checks and answers.

Code 31: Misadjusted Wastegate

Wastegate Actuator Adjustment Procedure

Detailed instructions for adjusting the wastegate actuator using specific tools.

Code 31: Misadjusted TV Cable

TV Cable Adjustment Steps

Step-by-step guide to adjust the TV cable using the throttle lever.

MEMCALs (PROMs) for Syclone/Typhoon

Authorized GM MEMCAL Identification

Lists the authorized MEMCAL (PROM) I.D. numbers for Syclones and Typhoons.

ECM Chaffing and ECM Replacement

ECM Bracket Replacement Procedure

Details steps to replace the ECM mounting bracket to prevent wire chaffing.

Installing the New ECM Mounting Bracket

Instructions for mounting the new ECM bracket and installing the ECM.

Fuel Systems: Operating Out of Specifications

Fuel Pressure Regulator Replacement

Steps to replace the fuel pressure regulator, including safety precautions.

Fuel Systems: Misadjusted Fuel Rails

Fuel Systems: Fuel Line Noise

Engine Timing Adjustment

Correct Engine Timing Setting

Specifies the correct engine timing setting (0 degrees BTDC).

Propshaft Condition and Joint Failure

Propshaft Joint Failure Analysis

Discusses checking for tampering signs in propshaft joint failures.

Torque Converter TCC Shudder

Malfunctioning Electronic Level Control Linkage

ELC Linkage Repair and Replacement

Steps for inspecting and replacing the ELC sensor link assembly.

Continued ELC Linkage Procedures

Continued steps for ELC linkage repair, including clearances and testing.

Related product manuals