GMC Yukon 2016 - Vehicle Personalization; Driver Assistance Systems

14
Vehicle Personalization
Driver Assistance Systems
Changing Vehicle Settings
The Vehicle Settings menu may include
Climate and Air Quality, Collision/Detection
Systems, Comfort and Convenience,
Lighting, Power Door Locks, or Remote
Lock/Unlock/Start.
Use the MENU knob or the touch screen to:
1. Select Settings on the home page.
2. Select Vehicle.
3. Select the desired menu item.
4. Select the desired feature and setting.
Settings are saved automatically.
5. Select BACK to exit each menu.
See Instruments and Controls in your Owner Manual.
Some vehicle features can be customized using the audio controls and menus or the
touch screen buttons.
The driver assistance systems use advanced technologies to help avoid collisions by
providing visual and audible alerts under some imminent collision conditions.
Forward Collision Alert
F
– The Vehicle Ahead
indicator will illuminate in green on the instrument
cluster when a vehicle is detected and will illuminate
in amber when following a vehicle ahead too closely.
If your vehicle approaches another vehicle too rapidly,
the will ash, a visual alert will ash on the wind-
shield and the Safety Alert Seat
F
will pulse. See Safety
Alert Seat.
Press the Collision Alert button on the left side of the steering wheel to set the
alert sensitivity to Far, Medium, Near, or Off. The setting is displayed in the Driver
Information Center.
Safety Alert Seat
F
– The driver’s seat pulses, left side,
right side, or simultaneously, to alert the driver of
potential hazards.
Audible notication may be selected instead of Safety
Alert Seat pulsing notication. To change the alert
setting, go to Settings > Vehicle > Collision/Detection
Systems > Alert Type.
See Driving and Operating in your Owner Manual.
F Optional equipment