What to do if my GME Electrophone TX4200 is receiving a signal?
If your GME Electrophone Transceiver is receiving a signal or the Squelch is set too far counter-clockwise, wait for the channel to clear or rotate the Squelch control further clockwise.
How to disable DUPLEX operation on GME Electrophone TX4200?
If the selected channel on your GME Electrophone Transceiver is set for DUPLEX operation, briefly press the DUP button.
General| Brand | GME Electrophone |
|---|---|
| Model | TX4200 Series |
| Category | Transceiver |
| Language | English |
Details general specifications including frequency range, channels, voltage, and dimensions.
Outlines transmitter parameters such as RF output power, frequency stability, and modulation.
Lists receiver specifications including sensitivity, selectivity, and frequency response.
Explains fundamental radio operations like Volume, Squelch, Channels, Duplex, PTT, and Scan.
Provides a general description of the TX4200 and its key features and capabilities.
Details the physical controls, buttons, and the Liquid Crystal Display interface.
Elaborates on essential functions: Volume, Backlighting, Squelch, Channel, Signal Strength, and Duplex.
Explains how to set a Priority Channel and introduces Open Scan (OS) and Group Scan (GS) modes.
Covers programming scan memories, operating Open Scan (OS) and Group Scan (GS) modes.
Introduces Selective Calling, its codes, Selcall Ident, and general operation principles.
Explains Quiet Mode, selective channel quieting, and different Call Modes ('Call To', 'Call From').
Details controls for Selcall Ident, Pager, Quiet mode, and alarm functions.
Guides on transmitting Selcall signals, selecting 'Call To' mode, and storing Idents.
Covers recalling Selcall Idents, configuring Quiet Channels, and operating in Quiet Mode.
Explains Group Calls, Paging function, and their programming and operation.
Details the Selcall alarm output for activating external alarm devices.
Explains the external alarm trigger input, its priority, operation, and connection methods.
Lists options for channel memories, Selcall, receiver IDENT, group calls, and scan modes.
Describes programmable options for Paging, Quiet Function, and their interaction with Selcall.
Provides instructions for mounting the transceiver and fitting the microphone securely.
Details DC power connection methods, including ignition-switched and always-on configurations.
Explains the antenna connection requirements for the UHF CB transceiver.
Explains the function of repeaters in extending radio range via re-transmission.
Helps identify display symbols, their functions, and key presses to cancel them.
Outlines the product warranty terms, conditions, and claim procedures.
Details GME Electrophone's after-sales service and support facilities.
To Next Page
