GMI Tricon - Overview of Termination Boards; Common Specifications; Power Supply and Fault Details; LED Indicators Explained

Termination Boards for Tricon & Tricon CX G.M. International ISM0452-6
2
This instruction manual refers to the following termination boards that can be connected to the Tricon and Tricon CX systems:
Power supplies and faults
For the following termination boards:
TBE-D5016-TRI-001;
TBE-D5016-TRI-002;
TBE-D5016-TRI-003;
TBE-D5016-TRI-004;
TBE-D5016-TRI-005;
TBE-D5016-TRI-006;
TBE-D5016-TRI-007;
TBE-D5016-TRI-008;
TBE-D5016-TRI-009;
TBE-D5016-TRI-011;
TBE-D5016-TRI-012;
TBE-D5008-TRI-001.
Redundant power supply connections and LED indications
are shown here below.
LED Signaling:
Meaning of LEDs on termination boards:
TAG LED COLOR MEANING
PWR 1 On GREEN The LED is on when the PWR 1 is within range
PWR 2 On GREEN The LED is on when the PWR 2 is within range
PWR 1 Fault RED The LED is on when the PWR 1 is out of range
PWR 2 Fault RED The LED is on when the PWR 2 is out of range
Cumulative Fault RED
The LED is on when at least one connected
module returns a fault
Alarm contact:
Alarm contact is closed in normal operation, while it opens in case of any fault.
MODEL TRICON SYSTEM TRICON CX SYSTEM PAGE
TBE-D5016-TRI-001

8
TBE-D5016-TRI-002

11
TBE-D5016-TRI-003

14
TBE-D5016-TRI-004

18
TBE-D5016-TRI-005

21
TBE-D5016-TRI-006

24
TBE-D5016-TRI-007
 
28
TBE-D5016-TRI-008

31
TBE-D5016-TRI-009
 
35
TB-D5016-TRI-010 / TBE-D5016-TRI-010

39
TBE-D5016-TRI-011

42
TBE-D5016-TRI-012

46
TBE-D5008-TRI-001

50
Alarm contact
24 Vdc PWR 1
24 Vdc PWR 2
PWR 2 On LED (green)
PWR 2 Fault LED (red)
PWR 1 On LED (green)
PWR 1 Fault LED (red)
Cumulative Fault
LED (red)
PWR 1 Fuse
PWR 2 Fuse
...
For the following termination board:
TB-D5016-TRI-010 / TBE-D5016-TRI-010.
Redundant power supply connections and LED indications are shown here below.
LED Signaling:
Meaning of LEDs on termination boards:
TAG LED COLOR MEANING
PWR 1 GREEN The LED is on when the PWR 1 is present
PWR 2 GREEN The LED is on when the PWR 2 is present
PWR 1 LED (green)
...
PWR 2 LED (green)
PWR 1 Fuse
PWR 2 Fuse
24 Vdc PWR 1 24 Vdc PWR 2