Hotline: +1 313-380-6888
(2) Install the bracket
1) Screw fixing:
Use the drilling tool to punch holes on the wall according to the hole
distance of the base. It is recommended to mark the holes on the wall
with a pencil before drilling. Screw the expansion nut into the holes on
the wall, and then connect the bracket to the expansion nut with screws
to complete the fixing.
2) Fix the camera
o
Align the bracket screw with the screw hole on the back of the camera,
and then rotate it to the tightened state.
Hotline: +1313-380-6888
To Next Page
Loading...