Need help?Do you have a question about the GMP G Series and is the answer not in the manual?
General| Brand | GMP |
|---|---|
| Model | G Series |
| Category | Industrial Equipment |
| Language | English |
Informs of a dangerous situation that, if not avoided, will cause death or severe body injury.
Informs of a dangerous situation that, if not avoided, will cause severe body injury or damage to property.
Operations must be by qualified engineers. Check floor load limits and avoid dropping.
Electrical connections must be carried out by fully qualified engineers.
Grounding is necessary for protection against electrical shock.
Dangers related to flammable/corrosive substances and keeping the area clean.
Safety procedures if gas is smelled: close tap, open windows, avoid sparks, call installer.
Use homologated pipes and ensure stable gas supply pressure with a dedicated line.
Procedure to measure and adjust supply and nozzle pressures using a manometer.
Solenoid valve regulation for specific models and leak checks after calibration.
Procedure to replace nozzles using original conversion kits for gas type change.
Danger of fire/explosion; use only GMP original parts for conversion.
To Next Page
