GN Jabra Elite 65e User Manual

How do I pair my Jabra Elite 65e with my mobile device?
Jabra Elite 65e - Titanium Black
To pair your Jabra Elite 65e with your smartphone, tablet, or other mobile
device, follow these steps.
1. Turn on the Bluetooth setting on your mobile device.
2. Turn off your Jabra Elite 65e by pressing and holding (3 seconds) the
Multi-function button until the LED flashes red and the neckband
vibrates.
3. To enter pairing mode, press and hold (3 seconds) the Multi-function
button until the LED flashes blue.
The headphones are now ready to pair with your mobile device.
4. To pair, go to the Bluetooth menu on your mobile device and select the
Jabra Elite 65e from the list of available devices.
Enter “0000” (four zeros) if you are asked for a pin code. The
headphones will announce when they are paired and connected.
28/04/2021 23:27
https://www.jabra.no/supportpages/jabra-elite-65e/100-99020000-60/faq/340fcb1c-5840-
42e4-917d-c553add442d4
Side 1 av 2

GN Jabra Elite 65e Specifications

General

Brand	GN
Model	Jabra Elite 65e
Category	Headphone
Language	English

Summary

Pairing Jabra Elite 65e with Mobile Devices

Initial Device Preparation

Turn on mobile Bluetooth and power off the Jabra Elite 65e headphones before proceeding.

Initiate Headphone Pairing Mode

Press and hold the Multi-function button for 3 seconds until the LED flashes blue to enter pairing mode.

Establish Bluetooth Connection

Select Jabra Elite 65e from your mobile's Bluetooth list and enter '0000' if a PIN is required.

Troubleshooting and Advanced Pairing

Troubleshooting Pairing Failures

If pairing is unsuccessful, repeat the steps or attempt connection with an alternative Bluetooth device.

Access Detailed Pairing Guide

Consult the comprehensive Bluetooth Pairing Guide for detailed instructions on connecting with mobile devices.