GNATUS Autoclave Bioclave 12L User Manual

GNATUS Autoclave Bioclave 12L

24 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Table of Contents

Questions and Answers:

P
psanchezAug 2, 2025
Why my GNATUS Autoclave Bioclave 12L autoclave can’t reach or maintain the pressure high?
- D
  David McintyreAug 2, 2025
  If your GNATUS Dental equipment autoclave can’t reach or maintain high pressure, several factors could be at play. First, ensure that an electrician checks and adapts the electricity supply if the voltage is lower than required. Next, disconnect the autoclave, remove, clean, and replace the safety seal and anti-vacuum valve; replace them if necessary. Ensure the door latch is correctly positioned by pushing it downwards. Verify that the water volume is as specified. Lastly, avoid overloading the chamber; use only up to 70% of its capacity, leaving space between packages.
G
gregory96Aug 12, 2025
How to fix a GNATUS Dental equipment autoclave that doesn’t switch on?
- M
  Melissa HernandezAug 12, 2025
  If your GNATUS Dental equipment autoclave doesn’t switch on, check a few things. Ensure the cord is properly connected to the socket. If there's a power cut, wait until the power is restored. Replace any burnt fuses. Check for bad contact in the socket and replace the socket if needed. Finally, make sure the ON/OFF switch is turned ON.

GNATUS Autoclave Bioclave 12L Specifications

General

Type	Autoclave
Model	Bioclave 12L
Capacity	12 Liters
Chamber Volume	12 Liters
Sterilization Temperature Range	121°C to 134°C
Temperature Range	121°C to 134°C
Power Consumption	1500W
Material	Stainless Steel Chamber
Power Supply	220V / 50Hz
Safety Features	automatic shut-off

Summary

Product Description

Warranty of the Equipment

General Data

Important Safety Considerations

Critical safety guidelines for safe autoclave operation and handling.

Characteristics and Operation

Details on manometer, sealing ring, safety valve, and control panel functions.

Accessories

Describes steam outlets, hoses, trays, graduated glass, and tray holder.

Technical Specifications

Specifications Overview

Lists detailed technical data, including voltage, power, volume, and dimensions.

Standards Compliance

Outlines the various international and national standards the equipment meets.

Transport and Storage Guidelines

Instructions for safely handling and storing the equipment.

Device Markings and Warnings

Explains various labels, symbols, and critical warnings on the equipment.

Installation

Voltage and Fuse Installation

Instructions for changing voltage settings and installing/replacing fuses.

Autoclave Preparation Steps

Guides on connecting hoses, checking trays, and ensuring proper grounding.

Operation

Basic Autoclave Usage

Step-by-step guide on adding water and preparing materials for sterilization.

Control Panel Operation

Explains how to initiate, monitor, and end sterilization cycles using the control panel.

Valve Reset Procedure

Instructions for resetting safety seal and anti-vacuum valves after use.

Maintenance

Chamber and Tray Cleaning

Procedures for cleaning the internal chamber and stainless steel trays.

Aluminum Chamber and Piping Cleaning

Guidelines for cleaning aluminum chambers and internal piping systems.

Filter Cleaning and Wrapping

Steps for cleaning the filter and best practices for sterilization wrapping materials.

Instrument Wrapping Techniques

Detailed, illustrated guide on proper techniques for wrapping instruments.

Control of the Sterilization Process

Steam Sterilization Process Control

Explains methods for controlling steam sterilization using biological indicators.

Biological Indicator Testing Procedure

Step-by-step guide for using biological indicators to ensure sterilization effectiveness.

Troubleshooting

Common Problems and Solutions

Lists common issues, their probable causes, and recommended solutions for the autoclave.

Final Considerations

Spare Parts and Authorized Dealers

Advice on using original spare parts and authorized service for equipment maintenance.

Related product manuals

GNATUS Syncrus GL TB