Parking mode doesn't work on curves or slopes of the road.
To switch to parking mode, the dash cam needs some information such as
the path of travel and the horizontal angle of the car. If the car is parked on
an incline, the dash cam may not recognize that the car is stationary.
In other words, the vehicle maintains an angle above the specified value,
the dash cam may misunderstand that some event has occurred.
How can I set the date and time through GNET viewer?
Insert the memory card into your PC and open the dedicated PC viewer.
Select the time zone to match the date and time on your current location in
Settings and save it. Then, reinsert the memory card into the camera and
start over.
Setup is completed in a few minutes depending on your environment.
GPS signal reception does not work properly.
For your information, GPS needs to be far away from the dashcam to prevent
interruption of GPS reception inside the car.
45
Q&A
UESTI
N & ANSWE
To Next Page
Loading...
