4.2 Camera connection details
user manual | 17
4.2.1 Connection between controller and camera
When using the RS422 connection, the 3rd port of the controller (Ra) connects to the
3rd port of the camera (TXD IN-), the 4th port of the controller (Rb) connects to the
4th port of the camera (TXD IN+), the 1st port of the controller (Ta) connects to the
1st port of the camera (RXD IN-) and the 2nd port of the controller (Tb) connects to
the 2nd port of the camera (RXD IN+).
When using the RS232 connection, the 1st connector of the controller (RXD)
connects to the 3rd connector of the camera (TXD), the 2nd connector of the
controller (TXD) connects to the 5th connector of the camera (RXD), the 3rd
connector of the controller (GND) connects to the 4th connector of the camera
(GND). Or use a standard RS232 cable (EVI CONTROL CABLE) to connect both
devices.
r
To Next Page
Loading...