Need help?Do you have a question about the Go Electronic RCC1000 and is the answer not in the manual?
General| Brand | Go Electronic |
|---|---|
| Model | RCC1000 |
| Category | Controller |
| Language | English |
Describes the function keys, number keys, and basic function keys of the controller's keyboard.
Explains that operations of keys and joystick are displayed on the LCD screen.
Illustrates the operations and output controls of the joystick for camera movement and zoom.
Details the rear panel layout, including RS422, RS232 ports, DC 12V input, and status indicator lights.
Differentiates single key functions from combined key functions for camera operations.
Explains the requirement of control mode for combined key functions and how to return to it.
Describes the process of selecting a camera ID using the [Cam] and [Enter] keys.
Details how to set the camera ID automatically or manually for single and multiple cameras.
Explains how to save camera positions as presets and how to recall them.
Guides on accessing and configuring camera functions via the controller's menu system.
Outlines system settings including password, factory defaults, key-press sound, ID, and lock.
Details the procedure for resetting the controller to its default factory settings.
Explains how to enable or disable the keyboard lock function and set a password.
Provides a structural overview of the system settings and their interdependencies.
Describes how to view system information such as model, serial number, KB ID, lock, and sound status.
Illustrates the typical wiring setup for connecting cameras to the controller.
Provides detailed wiring instructions for RS422 and RS232 connections between controller and camera.
Explains the daisy-chain connection method for multiple cameras using RS422 or RS232.
To Next Page