3. System settings
3.1 System settings setup
user manual | 13
The controller's system settings include: password, default factory settings, key-press
sound on/off, ID, lock.
3.1.1 Default factory settings
Press and hold [Setup] for 3 seconds. LCD screen displays
Key in password (default is '8888'), press [Enter]. LCD screen displays
Move joystick right. LCD screen displays
Press [Enter]. LCD screen displays
Press [Enter] again. Buzzer will sound for about 1 second. Setup is finished and LCD
screen displays
Press [Esc] to quit and exit without saving setup.
Press [Esc] two times to return to normal mode.
3.1.2 Keyboard lock on/off setup
Press and hold [Setup] for 3 seconds. LCD screen displays
Key in password and press [Enter]. LCD screen displays
Move joystick to select item 6. LCD screen displays
Press [Enter] to turn off keyboard lock function. LCD screen displays
Move joystick left/right. LCD screen displays
To Next Page
Loading...