user manual | 12
10. CAM_LR_ReverseModeInq: LCD screen displays Move joystick
left/right to select ON or OFF.
11. CAM_FreezeModeInq: LCD screen displays Move joystick left/right
to select ON or OFF.
12. CAM_PictureEffectModeInq: LCD screen displays Move joystick
left/right to select ON or OFF.
13. CAM_ICRModeInq: LCD screen displays Move joystick left/right to
select ON or OFF.
14. CAM_AutoICRModeInq: LCD screen displays Move joystick left/
right to select ON or OFF.
Note:
1. The controller will receive answer code from camera when performing above
operations. If answer code is not correct, controller LCD screen will display "RE
DATA UNKNOWN".
2. When finished making menu selection, LCD screen will display There
are two options for saving a menu setting. Press [Enter] to save current setup until it
is modified by user (setting will be saved even if controller is powered off). Press
[Esc] to save current setup only until controller is powered off.
To Next Page
Loading...