Why is my Go-On A007G-07C not cool enough?
If your Go-On Air Conditioner isn't cooling enough, it might be due to several reasons: * Ensure all windows and doors are properly closed. * Eliminate any heat sources within the room. * Verify that the exhaust air hose is correctly connected and free from obstructions. If it's blocked, clean it. * Lower the temperature setting. * Check the air inlet and clean it if it's blocked.
What to do if my Go-On Air Conditioner shows an E2 Code?
If your Go-On Air Conditioner displays an 'E2' code, it indicates that the water pump has failed. You can try restarting the unit to see if the error disappears. If the problem persists, consider replacing the water pump.
What does E0 code mean on a Go-On Air Conditioner?
If your Go-On Air Conditioner displays an 'E0' code, it means that the room temperature sensor has failed. You can replace the room temperature sensor. Note that the unit can still function even without replacing it.
Why is my Go-On A007G-07C Air Conditioner so noisy?
Your Go-On Air Conditioner might be noisy due to a couple of reasons: * If the unit is placed on uneven ground, try to place it on a flat, level surface. * The noise might be due to the refrigerant flowing inside the air conditioner, which is normal.
Lists and quantifies all included accessories with their images.
Instructions for placing the unit on a flat, dry surface away from obstructions.
Guidance on connecting the exhaust hose, window kit, and addressing potential installation issues, warnings, and notes.
Provides details on returning defective products for service and warranty claims.
General| Brand | Go-On |
|---|---|
| Model | A007G-07C |
| Category | Air Conditioner |
| Language | English |
To Next Page