Sequential Record _ Your Dual-Deck VCR will
record on a tape in Deck One, then automatically
activate Deck Two to begin recording when the tape
in Deck One is finished, When finished each tape will
automatically rewind and stop. 1-2 will appear on the
Front Panel Display.
Normal Record * Your Dual-Deck VCR will begin
recording a tape in whichever Deck you activate by
pressing the REC button.
1. Press _ to select this item. Subsequent pressings
of this nmnber will cycle this Dature between
NORM, SEQ, and LOOP.
You can also use _ (Mute button) to highlight
this item and _ (LCV button) to change
this f>ature.
2. When the desired setting is shown on the screen,
either press _, to exit this menu or move to
another item.
CHAPTER3 - PROGRAMMING YOURDUAL-DECKVCR :35
To Next Page
