NO TE:
Press _ until you get the desired
menu-Deck Oneor Deck Two.
f
DECK TWO/ONE MENU
I : RECORD SPEED SP
2:TAPE LENGTH T120
3*TIMER RECORDING
4: RECORD SOURCE AUTO
5: HI-FI AUDIO ON
PRESS SELECT/CHANGE TO
SET AND MENU WHEN DONE
_ /
NOTE:
SP will give you the best quality.
However, you must determine whether
there is enough time on the tape to
record the entire selection, tf there is
not enough time to record the entire
selection in SR you can set record
speed to ER Be sure, to set the correct
tape lengt,b in this menu.
NOTE:
tt you press _J and do not get the
Features menu, continue pressing
untit you see the Features menu.
Deck One/Deck Two Menu
Record Speed [Menu,1]*
1. Press (!) to select this item, Subsequent pressings
of this number will cycle this feature between
SP and EP.
You can also use _ (Mute button) to highlight
this item and _ (LCV button) to change
this feature.
2. When the desired setting is shown on the screen,
either press _, to exit this menu or move to
another Rein.
Tape Length [Menu,21
It is important to select what length of tape you are
using f_)r the Auto speed setting in Timer Record to
work. Note your tape box to see what length tape is.
1. Press @ to select this item. Subsequent pressings
of this number will cycle this feature between
T120, T160, T180, and T200.
You can also use _ (Mute button) to highlight
this item and _ (LCV button) to change
this feature.
2. When the desired setting is shown on the screen,
either press _, to exit this menu or move to
another Rein.
CHAPTER3 - PROGRAMMING YOURDUAL-DECKVCR 39
To Next Page
Loading...
