"Why can't I get a Menu or an On°Screen DispUay?"
If" the VCR is playing an unrecorded or blank tape,
the VCR cannot produce on-screen data to be dis-
played. Stopping the tape, or recording on it, will
allow the on-screen display to resmne.
See the No Menu is Visible' troubleshooting flow chart
on page 61.
"Why do I get a blue screen?"
If the VCR's tuner cannot receive a normal synchro-
nized signal, it will put a blue screen in its place.
Double check your antenna connections.
"The Power indicator is blinking."
Your Dual-Deck VCR is in Auto Power Off mode. If you
press the power button while rewinding a tape, timer
recording, One-Touch recording, copying a tape, or
using EZ-Copy, your VCR will automatically turn off
when that flmction is completed. Repeatedly pressing
the power button will turn Auto Power mode on and off.
"Copy on the Front Panel DispUayis blinking."
Any pause (interruption) in the Copy Tape process
will cause this button to blink. See Sync Edit,
page 27.
66 DISCOVERTHE DUAL-DECKDIFFERENCE
To Next Page
Loading...
