EasyManua.ls Logo

Go-Video DVR4400 User Manual

Go-Video DVR4400
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Start Here
:: Basic Connections
The following connections are required in order to operate your DVD+VCR:
1 Connect Antenna to DVD+VCR Connect the coaxial cable from your
antenna or cable TV jack to the IN (FROM ANT.) jack on the DVD+VCR back
panel.
2 Connect DVD+VCR to TV Choose either RF Out or Line Out:
a. RF Out Use if you have an older television with only a basic antenna
input: Connect the supplied coaxial cable from the OUT (TO TV) jack on the
DVD+VCR back panel to the antenna in jack on your television.
b. Line Out Use for better sound and picture quality if your television has
audio/video inputs: Connect the supplied audio/ video cable from the LINE
OUT jacks on the DVD+VCR back panel to the line in jacks on your television.
3 Power on DVD+VCR & TV Plug the DVD+VCR power cord into a
standard 120V/60Hz wall outlet, and turn on your television and DVD+VCR.
4 Select Channel 3 or Line If you used the RF Out connection, tune your
television to channel 3. If you used the Line Out connection, set your television
to its Line or Aux input
Unpack Your DVD+VCR
• DVD+VCR
• Remote control
• 1.5V AA batteries (2)
• Coaxial cable
• Audio/video cable
• Users guide
• Read Me First/
Quick Reference Guide
• Warranty registration card
Insert Batteries
1 Remove battery cover.
2 Insert two 1.5V AA batteries, paying
attention to the correct polarities (+/–).
3 Replace cover.
• The Language/Langue/Idioma menu should appear on your television
screen. Please proceed with Auto Setup.
• In order to view the setup menus, you MUST connect the DVD+VCR to
your television with the RF or Line Out connec-tions, even if you plan
to use the S-Video or Component Video outputs.
• If you are not getting a good picture, try changing the RF Out-put to
channel 4; see the Users Guide for details.
• CD-ROM, CD-G, photo CD, and CD-i discs
cannot be played on this DVD player.
Q uestions?
O ur Aw ard-W inning Customer
Service Professionals are
Ready to Help!
O r Check O ur
Website!
www.sonicblue.com
Call U s!
1-800-736-7679
E -M ail Us!
customerservice@sonicblue.com
DO N O T R E TU RN TH IS
PR O DUCT TO TH E STO R E !
T
han
k
You
!
For Fast, Friendly
Service
For a Prompt R e ply
For the Latest FAQ s
STOP
Antenna
DVD+VCR
Television
Audio/Video
Cable
Coaxial
Cable
Question and Answer IconNeed help?

Do you have a question about the Go-Video DVR4400 and is the answer not in the manual?

Go-Video DVR4400 Specifications

General IconGeneral
TypeDVD VCR Combo
BrandGo-Video
ModelDVR4400
Video FormatNTSC
Remote ControlYes
Playback FormatsDVD
InputsComposite video, S-Video
OutputsComposite video, S-Video
Recording FormatDVD-R/RW, DVD+R/RW

Summary

Insert Batteries

Battery Installation Steps

Guide on removing the cover, inserting batteries with correct polarity, and replacing the cover.

Basic Connections

Connect Antenna to DVD+VCR

Connect the coaxial cable from your antenna or cable TV jack to the IN (FROM ANT.) jack on the DVD+VCR back panel.

Connect DVD+VCR to TV

Choose either RF Out (older TVs) or Line Out (better quality) and connect via supplied cables.

Power On and Channel Selection

Plug in power, turn on devices, and select channel 3 (RF Out) or Line/Aux input (Line Out).

Basic Controls

Deck Control Keys

Explanation of DVD, VCR, TV, and TV View keys for controlling different functions.

Basic Disc Playback

Playing a DVD, CD, or VCD

Steps for opening the disc drawer, inserting the disc, closing the drawer, and starting playback.

Basic VCR Playback

Playing a VHS Tape

Instructions for inserting a VHS or S-VHS tape and beginning playback.

Related product manuals