Beam Adjustment
On/Off Button
GET TO KNOW YOUR GEAR
The Flashlight Tool is a bright, 110 lumen LED light with
an adjustable beam.
1. Plug the Flashlight Tool into Goal Zero Switch 10’s
USB output or another live USB port.
2. If using the Goal Zero Switch 10: Keeping one hand
on the flashlight, slide the metal collar up one click,
and twist the collar in the direction indicated by the
“tighten” arrow until snug.
3. Twist the silver beam adjustment collar to focus.
Light
LED (output) 3W, white CREE LED, 110 Lumens
Runtime on Goal Zero
Switch 10
4 hrs
General
Weight 2 oz (56 g)
Dimensions 2.6 x 1.3 x 1.3 in (6.6 x 3.2 x 3.2 cm)
Operating Usage Temp. 32-104F (0-40C)
Certs
Warranty 12 months
Be sure to activate your warranty at goalzero.com/warranty
TECHNICAL SPECIFICATIONS
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
To Next Page
Loading...
