GOAL ZERO SHERPA 100PD User Guide

1
Make sure your Goal Zero Sherpa 100PD is fully charged before using or
storing. Keep your Goal Zero Sherpa 100PD plugged in when not in use.
Read all instructions and cautions carefully before use to avoid personal
injury or damage to the unit and any connected products.
Observe all Input/Output connectors ratings: To avoid fire or electrical
shock hazard, observe all ratings on unit, and products you intend to
use; check manuals for more information.
Use in a ventilated area: Ensure proper ventilation while in use.
Inadequate ventilation may cause damage to the unit. During storage do
not stack anything on top of unit.
DO NOT operate in wet conditions: In order to avoid short circuits
or electric shock do not allow unit to get wet. Let unit dry completely
before using.
Keep the unit clean and dry: Inspect the unit for dirt, dust, or moisture
on a regular basis.
DO NOT insert foreign objects into outputs or ventilation holes.
Any manipulation to the unit or its components will void all warranties.
IMPORTANT SAFETY INSTRUCTIONS
CHARGE ME NOW
Table of Contents
Get to Know Your Gear 2
Charge Before Use 3
Using the Sherpa 4
Frequently Asked Questions 5
Technical Specifications 6
Français 7
Deutsch 13
Español 19
Italiano 25
Portugués 31
日本語
37
Suomalainen 43
Nederlands 49
Svenska 55

GOAL ZERO SHERPA 100PD Specifications

General

Certification	CE, FCC
Product color	Black, Grey
Built-in display	Yes
Charger compatibility	Universal
Number of simultaneously connected devices (max)	4
Fast charging	-
Battery voltage	14.8 V
Charging source	USB
Battery capacity	6400 mAh
Input interface	USB Type-C
USB Type-A output ports	2
USB Type-C ports quantity	1
Port 1 output current	2.4 A
Port 3 output current	3 A
Operating temperature (T-T)	0 - 40 °C
Sustainability certificates	RoHS

Weight and Dimensions

Depth	190.5 mm
Width	94 mm
Height	25.4 mm
Weight	635 g