8
9
Battery:
Cell Chemistry Li-ion NMC
Pack Capacity 1045Wh (10.8V, 96.8Ah)
Single Cell Equivalent Capacity 290.4Ah @ 3.6V
Lifecycles 500 Cycles to 80% capacity (Discharge rate: 1C, Full
charge/discharge, Temp: 25C
Shelf-life Charge every 3-6 months
Management System PWM charge controller, low battery protection
Ports:
USB Port (output) 5V, up to 2.4A (12W max), regulated
6mm Port (output, 6mm) 12V, up to 10A (120W max)
12V Car Port (output) 12V, up to 10A (120W max)
12V Power Pole port (output) 12V, up to 10A (120W max
110V AC Inverter (output, pure sine wave) 110VAC 60Hz, 10A (1500W, 3000W surge)
Charging Port (input, 8mm) 16-30V, up to 10A (160W max)
Power Pole Charging Port (input) 16-30V, up to 20A (240W max)
Expansion Module port Covered port under the lid. To be used with Goal Zero
expansion modules only.
General:
Chainable Ye s
Weight 40 lbs (18.1 kg)
Dimensions 10.1 x 15.3 x 9.3 in (25.7 x 38.9 x 23.6 cm)
Operating Usage Temp. 32-104 F (0-40 C)
Certs
Warranty 12 months
Storage and Downtime Maintenance Technical Specifications
Having your Goal Zero Yeti connected to a power source, like a solar panel or wall plug,
between adventures or while in storage keeps its battery healthy and topped off. This
prolongs battery life and will ensure your Goal Zero Yeti is charged and ready to go all
day, every day.
If you can’t keep your Goal Zero Yeti plugged into a power source during storage,
fully-charge your Goal Zero Yeti every 3 months and store it in a cool, dry place.
Failure to maintain your Goal Zero Yeti by following these steps can result in battery
damage which will void the product warranty.
To Next Page
Loading...
Need help?
General
