Need help?Do you have a question about the GOAT BLUE Series and is the answer not in the manual?
The output level of Channel A can be adjusted.
The output level of Channel B can be adjusted.
Selects between DIST/EDGE/CLN/CLN2 distortion channels.
Adjusts Channel A/B modes more precisely.
Reproduces phase cancellation patterns.
Adjusts noise gate sensitivity.
Matches guitar output level to connected device.
Controls sustain feedback and distortion overtones.
Indicates compressor operation and threshold.
Indicates DIST/EDGE mode activation.
Controls overall treble component.
Switches between Channel A (Red) and Channel B (Green).
Switches effect on/bypass.
Adjusts gain for fine tuning in all modes.
Adjusts sustain time and distortion.
Indicates compression operation and threshold value.
Excludes high frequency noise without sound cutoff.
Selects between four basic guitar sounds via footswitch.
Provides variations on PHASE and MODE circuit settings.
Adjusts overall EQ and volume after processing.
Roughly adjusts overall frequency response.
Master volume controller for the sustainer.
General| Brand | GOAT |
|---|---|
| Model | BLUE Series |
| Category | Portable Generator |
| Language | English |
To Next Page