EasyManua.ls Logo

Gobi Heat Eclipse - Hammock Set Up; Suspension Set Up

Default Icon
5 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
2
3
Find two living, mature trees
or anchor points approx. 10-14
feet (3-4 meters) apart that can
safely support the hammock.
MAX WEIGHT
400lbs.
10-14’
Attach carabiners to straps
making sure each carabiner
clicks into the closed
position.
Achieve a hanging height of
18” (45cm) by gently lowering
yourself into the hammock to
determine if any adjustments
are needed.
GOBI HEAT
®
HAMMOCK SET UP
Gobi Heat Hammocks work best with suspension systems.
Carefully follow the instructions provided. Failure to adhere
to these guidelines may result in serious injury or death.
1
Loop straps around trees
at least 5 feet (1.5 meters) from
the ground, threading the
adjustable end through webbing
end with single loop.
Attach carabiners to straps
making sure each carabiner
clicks into the closed
position.
GOBI HEAT
®
SUSPENSION SET UP
The Gobi Heat Suspension System is a unidirectional design which needs
to be setup properly for maximum performance and durability.
Failure to adhere to these guidelines may result in serious injury or death
2
CLICK CLICK
For maximum comfort
don’t hang your hammock too tight. Position
yourself at an angle to lay flat.
30°
4