11
How to…
…attach and use the crevice/brush multi-tool
Please note
2. Attach the crevice/brush
multi-tool to the end of
the hose. The crevice tool
is now ready to use.
3. To use the brush attachment on the
crevice tool, pull the top brush section
in the direction of the arrow until it
clicks into place. To use the crevice
tool, simply push the brush back to the
horizontal position.
1. Remove the floor head from the
telescopic tube by twisting the pole in
any direction (1) and pulling upwards
(2). Next, remove the telescopic tube
from the hose end.
21
To Next Page
Loading...
