17
How to…
…clear a blockage
1. Check the bin and empty
if necessary.
Check that the small holes are
not blocked with flu or debris;
remove and clean if needed.
2. Check the filters in the unit, remove any debris/dust and wash if necessary.
Ensure the vacuum is not plugged into the mains supply and is switched
The vacuum would only become blocked if the bin has become too full,
the filters are clogged up or a large object has been sucked up.
3. If the crevice/brush multi-tool
was in use, detach it from the
hose and check for blockages.
To Next Page
Loading...
