18
How to…
…store your vacuum
1.
supply and unplug.
2. Remove the crevice/brush multi-
tool if last used with it on and attach
the telescopic tube and floor head
instead. Ensure the pole is at its
shortest extension.
3. On the back of the floor head there
is a lug which can slide into the back
of the vacuum to enable the hose
assembly to stand upright.
4. Retract the cord until it is all in the
vacuum housing.
5. Store the vacuum away safely in a
dry place.
4. Press the release button and pull the hose out.
Lay the hose flat and look down it
to see if there are any blockages.
If there are, use the handle of a
broom to clear the obstruction.
Take care not to damage the hose
in the process.
To Next Page
Loading...
