Goblin GVU402R-21 - Filter Cleaning and Maintenance

11
Cleaning the filters
Before starting any cleaning, ensure the upright vac is not plugged into
Wash with water every month, allow at least 24 hours to dry and
make sure it is dry thoroughly before re-using
1. Remove the
dust canister.
2. Push the
release button,
open the dust
canister and
clean all parts of
the dust canister.
3. Open the dust
canister filter lid
located on top
of the canister.
4. Remove the
dust canister foam
and HEPA filter.
Shake and tap the
foam and HEPA
filter over a bin to
remove any excess
dust.
5.
6. Allow filter to
dry for 24 hours
before putting
back into
vacuum cleaner.
7.