Goblin GVU402R-21 - Assembly and Operation; Initial Assembly Steps

7
Assembling and using
the pet upright vac
Before assembling or disassembling attachments, ensure the pet
upright
Remove the dust canister before
installing handle. Push the handle
onto the vacuum body, and use a
Phillips screwdriver to secure it
with the screw provided.
IMPORTANT: The handle must be
inserted first before replacing dust
canister.
Place the short hose
end onto the connector
(left hand side if
looking at the back of
the vacuum), and
rotate clockwise to
lock.
Push the hose handle
into the connector, and
place the 3-in-1
attachment onto the
storage holder in front
of the hose handle.
Twist the quick
release cord hook to
release the power
cord.
Place the dust canister back
onto the machine and push
until it clicks into place.
2
1
3
1
2