EasyManua.ls Logo

Goblin IB86000 - User Manual

Default Icon
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Steam ironSteam iron
Steam ironSteam iron
Steam iron
Please read and keep these instructions
getting the best from your
new iron...
Safety first
Use caution as burns can occur from touching hot metal parts, hot water or
steam.
Keep the soleplate of your iron clean
Always follow the manufacturers instructions, refer to advice on page 7.
In order to achieve the best results
Follow the fabric guide on page 3, but be sure to test the temperature by
ironing the hem of the garment or similar area first.
Certain models only
STEAM IRON 31/5/02, 11:47 AM1
Question and Answer IconNeed help?

Do you have a question about the Goblin IB86000 and is the answer not in the manual?

Summary

Getting the Best from Your New Iron

Safety First

Use caution as burns can occur from touching hot metal parts, hot water or steam.

Important Safety Instructions

Personal Safety

Do watch iron during use. Do not operate with damaged cord/plug or if dropped/damaged.

Child Safety

Close supervision is necessary. Never allow a child to operate. Teach children about kitchen dangers.

Special Instructions

Check Operation and Temperature

If iron doesn't work, check temperature control, plug, socket, or faulty appliance.

Prevent Textile Damage

Follow temperature guide carefully and test on garment hem to prevent damage to textiles.

Handle Dropped;Knocked Iron

If iron is dropped or severely knocked, have it checked by a qualified electrician for internal damage.

Electrical Requirements

Voltage and Plug Compatibility

Check voltage matches supply. If socket is unsuitable, remove and fit appropriate plug.

Plug Removal Hazard

Removed plugs must be destroyed as flexible cord with bared wires is hazardous.

Fuse Requirement

Use a 13 amp BS1363 plug with a 13 amp BS1362 fuse fitted.

Earthing Requirement

Warning: This appliance must be earthed.

Filling the Iron

Water Filling Procedure

Set steam control to lowest position. Fill water through hole using provided beaker.

Temperature Control

Setting Temperature

Plug in, switch on, set dial to required temp. Wait a few minutes for stabilisation.

Maintenance

Self Cleaning Procedure

Apply monthly to remove scale. Heat iron to max, turn temp dial down to min to clean.

Goblin IB86000 Specifications

General IconGeneral
BrandGoblin
ModelIB86000
CategoryIron
LanguageEnglish