Need help?Do you have a question about the GOCMAKSAN B45X1 and is the answer not in the manual?
Explains various tags and their meanings found on the machine.
Details on connecting the machine to the power supply.
Procedures for establishing a proper grounding connection for safety.
Explains the function of the control buttons shown in the diagram.
Details on the machine's capacity for bending different steel types and diameters.
Specifies the physical size of the machine.
Lists the motor's power, voltage, and operating frequency.
Demonstrates correct methods for positioning rebars for bending.
Illustrates common errors in single rebar placement during bending.
Shows further examples of incorrect rebar positioning for multi-rebar bending.
Lists essential personal protective equipment (PPE) for safe operation.
Advises on appropriate attire to prevent accidents.
Details the purpose and operation of each button on the control panel.
Explains the motor protection switch and its settings.
Instructions for setting up the machine for standard bar bending.
Guidance on setting the machine for 90-degree bends.
Instructions for configuring the machine for 180-degree hook bends.
Procedures for setting up and performing stirrup bending.
Tasks for daily upkeep and cleaning.
Checks and lubrication for weekly upkeep.
Inspections for wear and tear, and oil checks.
Bolt connection checks every six months.
Procedures for annual oil changes and part replacements.
Troubleshooting steps for when the machine fails to start.
Diagnosing and resolving issues with continuous bending disk rotation.
Addressing problems related to the motor protection switch tripping.
Steps to fix the issue when the machine doesn't run with the foot pedal.
Troubleshooting the emergency stop function.
Identifying causes and solutions for unusual machine noise.
Steps to resolve oil leaks from the machine.
General| Brand | GOCMAKSAN |
|---|---|
| Model | B45X1 |
| Category | Construction Equipment |
| Language | English |
To Next Page